Product Page

Check Presenter with Clip

#1348-clip

Details
You work hard to make a good impression, you spend countless hours on the menu, you get the décor and lighting just right and then you drop the bill on the table without any thought but to get paid? Help all your restaurant and food service companies end the visit on an impressive note with our wood check presenter. Laser cut to size and laser engraved with your client’s artwork will put the focus back on you and not the bill. This version of our check presenter has an antique gold clip which can be attached to the side or the top to not only hold the bill, but also adds a "rustic" or "alternative" look!

Normal Production Time: 7 Days.
Product Size: 4" x 8" x 1/4".
Made In: United States.
Additional Information: Price includes a one position laser engraving or 4C digital print. Laser Area: 3.50 x 1.0".

Wood / Finish:
Dark Walnut, Rosewood, Natural Cherry, Walnut, White Lacquer, Storm Gray, Maple, Black Stain, Dark Red Mahogany, Black Lacquer, Honey Maple
Proofs:
Paper Proof, Sample Proof, Sample Proof, die cast
Laser Engraving (add'l location or size):
Laser Engrave Run Charge, Laser Engrave Run Charge +size
Less Than Minimum:
Blank Less Than Minimum, Decorated Less Than Minimum
Clip Finish:
Clip - Brass, Clip - Antique Brass, Clip - Silver, Clip - Black
4-Color Digital Print:

Base Prices
Qty	Price
12	$22.61 (Each)
25	$21.61 (Each)
50	$20.64 (Each)
100	$20.23 (Each)
250	$19.59 (Each)
1	$80.00 (Each)
Setup Charge: $0.00

PRODUCT OPTIONS

Wood / Finish ( Required )

WF-12 (w/ BL & WL)

Maple (m)

Honey Maple (hm)

Natural Cherry (nc)

Rosewood (r)

Dark Red Mahogany (drm)

Walnut (w)

Dark Walnut (dw)

Storm Gray (sg)

Black Stain (bs)

White Lacquer (wl)
Add 10% to product price for a white lacquer finish.

Black Lacquer (bl)
Add 10% to product price for a black lacquer finish.

Proofs ( Optional )

Proofs Proofs are available on request. To see your artwork at the actual size and location as it will appear on your finished order, request a paper or digital proof. First digital proof is free with all orders; all additional proofs are $ 7.00. To see the actual product with your artwork on it as it will be completed, request a sample proof ($ 60.00 per product plus cost of the item - 7 WD or less after receipt of artwork approval); unless the product has a die cast component, then it is $ 95.00 plus product cost and 12 working days after artwork approval.

Paper Proof (Paper)
One proof is provided with each order free of charge. There is a charge for any subsequent proofs or changes.
Price : $7.00 Each

Sample Proof (Sample)
An actual piece as you have ordered. 7 working days after receipt of order and artwork approval.
Price : $70.00 Each

Sample Proof, die cast (Sample, dc)
An actual piece, die casted as you have ordered. 12 working days after receipt of order and artwork approval.
Price : $95.00 Each

Laser Engraving (add'l location or size) ( Optional )

laser engrave The listed product price includes a one position laser engraving up to the size stated (If it shows no setup, the price does not include decoration.) Additional positions and/or sizes may be added for the prices shown. Laser Set up policy: exact repeat within 6 mo N/C; within 1-2 years 50%

Price: $80.00 Each

Limit : 4

Laser Engrave Run Charge (Laser Engrave Run)
$2.00 (G) up to 4 sq. in.

Laser Engrave Run Charge +size (Laser Engrave Charge +size)
$.40 (G) per square inch after 4 sq. in.

Less Than Minimum ( Optional )

LTM The minimum quantity of any standard inventory item is limited to one half of the first quantity listed for that item on our website or catalog. Please use the first quantity price as listed in the catalog and add $ 30.00 for blank merchandise and $ 60.00 for decorated merchandise. Setup discounts on repeat orders do not apply to less than minimum purchases.

Blank Less Than Minimum (LTM-B)

Price : $30.00 per Order

Decorated Less Than Minimum (LTM-D)

Price : $60.00 per Order

Clip Finish ( Optional )

Clip Finish

Clip - Brass (Clip - Brass)

Clip - Antique Brass (Clip - Antique Brass)

Clip - Silver (Clip - Silver)

Clip - Black (Clip - Black)

4-Color Digital Print ( Required )

4-c print Full color images are directly printed to product surfaces, metal plates, plastic plates or leather with state of the art equipment at resolutions as high as 5760 dpi. We use an 8 color printer utilizing the CMYK color palette. PMS color matches will be done via the PMS 4-color process bridge standard. Artwork should be vector based and saved in the RGB color palette. We can accept .eps, .pdf, .psd and .cdr files. Up to 3 square inches (si) included at $1.50 (g) with additional si at $0.38 (g). If plates are needed, the plate cost will be included for up to 3 sq. in. Larger plates or when plates are not included will be quoted upon request. Price based on size of image - $1.65 (g) minimum for the first 3 sq inches; $0.50 (g) / additional sq inches. Set up charge: d. Digital print: $ 70.00 (g) repeat: 6 mo N/C, 1 yr 50%

Qty

Price

$0.38 (per Sq. Inch)

$1.50 (per Sq. Inch)

$70.00 (per Sq. Inch)

Limit : 1

IMPRINT LOCATIONS

Please choose the location(s) that you would like to imprint/decorate.
(For applicable products, you may choose to decorate multiple locations)